LVL Lay-up and Pressing Line R5
The perfect solution to start the LVL production
LVL Lay-up and Pressing Line R5 is the standardized solution for LVL production
We have answered the increasing demand for production profit optimization globally with a standardized easy-start solution for basic LVL production – The LVL Layup and Pressing Line R5. The solution is always delivered with the LVL Billet Handling Line R5.
This solution is perfect for plywood producers seeking a new way to increase profit or for the producers who are planning on entering the LVL market. With the R5 you can produce a wide enough product repertoire that the common markets need.
The lines have been designed with standardized components, so the price tag is smaller, the delivery and commission time is short, and it is easy to operate. Yet, the high quality of the end-products meets the market demand.
LVL Lay-up and Pressing Line R5 uses the same well-proven technology that our R7-series has, but it is designed for lower capacity needs. The R5 produces high-quality LVL with a fixed veneer size of up to 14 meters long. Due to optimized capacity and features, we have been able to reduce the needed floor area by 40% and the line needs only three operators to function in full capacity.
With R5 Series LVL Lay-up and Pressing Line, you can produce parallel ply LVL-P of most common raw materials. Standard solution means ready setup for you to produce a single product with mediocre capacity.
Only three operators needed
Up to 14 m long lvl products
Over 50% of LVL globally produced by Raute technology
Low investment costs
Standard solutions secures fast manufacturing, commissioning & ramp-up
|Operators on the Line||3|
|Capacity up to (m3/h)||6|
|Daylight No. (max)||2|
|Daylight opening (max)(mm)||150|
|Product Thickness Range (mm)||15-75|
|Veneer sizes (ft)||8x4|
|Line widths available (m)||1.2|
|LVL length (max)||14|
|Parallel Ply (LVL-P)|
|Cross Ply (LVL-C)|
|Phenolic resin glue|
|Smart thickness control|